Single Channel, Dual Channel, 4 Channel RF Lesion Generator Radiofrequency Thermal Coagulation Ablation System

• Customization: Available
• Classification: Pain Medicine
• Type: RF Lesion Generator
• Model NO.: SL-LPS400K
• Certification: Equipment Factory Inspection Report
• Group: People with Nerve Pain
• Transport Package: Carton Packaging
• Specification: Spine, nerves
• Origin: China
• Production Capacity: 1000 Set/Month

Product Description

RF thermal coagulation is to emit a high frequency RF current through the magnetic field. The RF current produces a changing magnetic field at the tip of the working electrode, so that the molecular movement in the target tissue covered by the magnetic field friction generates heat, and thermal coagulation damages the organization of the target area. It is an international advanced minimally invasive technology and the world's cutting-edge pain treatment method, with the characteristics of minimally invasive, qualitative, quantitative, definite efficacy and less complications.

2 Working principle

The RF thermal coagulation function of Thermo-coagulation Unit uses a disposable adhesive plate as the neutral electrode, and the thermal coagulation electrode transmits the RF thermal coagulation energy through the human tissue and the neutral electrode to produce the thermal coagulation treatment effect.
(2) Audio output table

order number	Audio properties	signalment	remarks
1	Normal buzzer 1	Bbass for 0.5 seconds	Normal initialization
2	Fault sound	Low pitch tone two tones: drops	Neutral electrode failure
3	Confirm sound	High and low tones of two tones	Neutral electrode fault recovery
4	The RFA output is effectively effectively	High pitch continuous sound	During the RFA effective output
5	RF coagulation output is effectively effectively	Bass continuous sound	During the effective output of RF coagulation
6	Fault sound	The same tone of two sounds: drops	With ault fault, see Error Display

(3) Handling with common problems

phenomenon	cause	The exclusion method
Turn on the power switch, and the device does not respond.	1, the network power outage; 2. The power cord is not well connected; 3. Ffuse.	1. Connect to the power supply; 2. Connect the power cord; 3. Replace the fuse.
During the normal working setting, the output power intensity setting is significantly reduced or the equipment does not work normally.	1. Poor contact of neutral electrodes; 2. The use method is incorrect.	1. Connect the neutral electrode correctly; 2. Repair or replace the accessories; 3, ask the manufacturer to solve.